More Views

G60 GPS Tracker

  • All weather applications
  • Rugged weather proof housing
  • Easy install & Easy to conceal
  • Compact 2G or 3G (NextG) GPS
  • variety of inputs and outputs

Software Subscription Fee (Per Month) $14.99

IP67 WATER-PROOF AND RUGGED GPS TRACKER

The G60 is a compact 2G or 3G (NextG) GPS tracking device with a variety of inputs and outputs to cater for the most demanding applications. Its rugged housing is IP67 rated to withstand the harshest environments, without sacrificing tracking and communications performance.  With the internal GPS and cellular antennae installation is a breeze. The internal backup battery provides alerts and tracking operations even when external power is removed.

Hardware Features

Compact rugged IP67 rated housing

Made of sturdy Nylon/Glass composite plastic the housing is extremely tough and UV resistant, is resistant to oils and can easily handle high temperatures

The housing is sealed using 4 screw and has 2 convenient mounting tabs.

Dimensions: 125mm x 80mm x 25mm
Weight: 250 grams

Harness Options

The G60 is manufactured with various harness options. Because of the nature of the housing the wire harness is soldered to the PCB at production

3 wire (power, ground, ignition)

12 wire harness

Automotive power

Voltage

8V to 45V DC (max)

Operating Current

10mA average (battery fully charged)

145mA average (battery charging)

Sleep Current

<1mA

The G60 passes stringent automotive power “load dump” tests to ensure that it will continue to operate in the harshest electrical systems. A built-in self-resetting fuse makes installation easy and safe.

Operating Temperature

-20°C to +75°C 1

1) On external power.

Below 0°C the standard internal backup battery’s ability to deliver sufficient power to operate the cellular modem is reduced. Below 0°C and above +45°C the internal backup battery will not be charged as a safety precaution due to dangers associated with charging batteries at extreme temperatures.

For battery powered tracking in extreme temperatures enquire about our Remora tracker with extended temperature range battery options.

High sensitivity GPS

UBLOX MAX7 GPS module

Supports GLONASS and other GNSS systems
72 channel high sensitivity receiver
-167dBm industry leading tracking performance
Battery backed up for optimal hot-start performance
AssistNow Offline aiding data for extremely fast time-to-first-fix and performance in urban canyon environments

Low noise GPS amplifier

GPS signals are boosted by a special low-noise amplifier (LNA)
This allows the G60 to operate where normal units will fail to receive GPS signal

2G or 3G (NextG)

The G60 can be manufactured for specific markets around the world with cellular modem modules approved by all the major networks

2G Modem

Quad Band GSM/GPRS Class 10
850 / 900 / 1800 / 1900 MHz

3G Modem – EU

850 / 900 / 2100
EMEA / APAC / Latin America

3G Modem - NA

850 / 1900 / AWS
North America

3G Modem
(Global Option)

800 / 850 / 900 / AWS / 1900 / 2100
Global coverage at a higher cost

*enquire for other bands and LTE / 4G options

Certifications

CE, C-TICK, ICASA, ACMA, ISO 7637-2

Internal Antennae

Internal GPS and cellular antennae

Having the antennae inside the housing makes for very simple and quick installation. The G60 has had its antennae tuned by the top laboratories to ensure optimal performance.

Backup battery

The standard 850mAh LiPo backup battery allows the G60 to operate when external power is removed for up to 7 days, depending on the amount of movement

4 x Digital Inputs

1 x Ignition line
3 x digital inputs with configurable pull-up / pull-down
Numerous configuration options including switches, duress/panic alerts, pulse counting

3 x Digital Outputs

3 x switched ground digital outputs, easily wired up to switch external lights, relays, buzzers, sirens, motors and other devices
Can be used to immobilise a vehicle

Sensor Interface

The G60 has an I2C interface which can be used to power and communicate with external sensors including temperature probes, humidity sensors and other sensors.

3 axis accelerometer

The 3 axis accelerometer allows the G60 to detect harsh driving events (harsh acceleration, braking and cornering) and this information can be used to monitor driver behaviour and unsafe driving.
It also allows the G60 to go to ‘sleep’ when not moving, resulting in extremely low standby current.

iButton

Communicate with common one-wire iButton devices

RS232

RS232 receive and transmit allow the G60 to communicate with external RS232 devices. These can include fuel monitoring, Garmin FMI, tyre pressure monitoring

The RS232 interface can also be used to configure the device and to test and debug.

Switched 3.3V out

The G60 can provide power to external sensors via this 3.3V power line, allowing for easy installation and doing away with the need for additional external power supplies.

Maximum current: 200mA

Switched 5V out

The G60 can provide power to external peripherals via this 5V power line, allowing for easy installation and doing away with the need for additional external power supplies.

Maximum current: 300mA

DMCAN peripheral port

Digital Matter has a range of peripherals that connect to the G60 via the DMCAN peripheral port. Peripherals such as the RFID Driver ID reader, 5 digit keypad, data console and RF gateway use the DMCAN port.

Flash memory

The G60 has sufficient memory to store over 50,000 records in its flash memory. Normally the data will be sent to the server immediately but if the device is out of range then there is sufficient space to ensure that no data is lost – for many weeks of driving!

The flash memory is also used to store parameters, GPS aiding data, accident data, driver lists and other important information that needs to be securely stored.

Garmin FMI

Coming soon

Warranty

One year manufacturer’s warranty